How to Clean Your Dyson V11 Cordless Vacuum Cleaner

How to Clean Your Dyson V11 Cordless Vacuum Cleaner?

Regularly cleaning your Dyson V11 cordless vacuum is essential for maintaining optimal suction power, prolonging battery life, and ensuring it performs well for years. Here’s a step-by-step guide on how to Clean Your Dyson V11 Cordless Vacuum Cleaner to help you clean each component effectively.

vacuums & floor care is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Raed more

Outline for Cleaning the Dyson V11 Cordless Vacuum
1. Why Regular Cleaning is Important
2. Tools and Supplies Needed
3. Step-by-Step Guide to Cleaning the Dyson V11
   3.1 Cleaning the Dustbin
   3.2 Washing the Filter
   3.3 Clearing the Brush Bar
   3.4 Cleaning the High-Torque Cleaner Head
   3.5 Wiping Down the Exterior
4. Tips for Maintaining Battery Health
5. Frequently Asked Questions (FAQs)

1. Why Regular Cleaning is Important

The Dyson V11 is engineered with high-tech parts that can clog if not regularly maintained. Regular cleaning helps keep suction strong, maintains the life of the filter, and prevents the motor from overworking due to dirt buildup.

2. Tools and Supplies Needed

  • Microfiber cloth
  • Soft brush
  • Clean water
  • Scissors (for hair tangles in brush bar)
  • Small brush (like an old toothbrush)

3. How to Clean Your Dyson V11 Cordless Vacuum Cleaner

3.1 Cleaning the Dustbin

  1. Remove the Dustbin: Press the red lever to slide the dustbin down and release it. The debris will automatically fall into your trash can.
  2. Wipe Inside: Using a soft, dry microfiber cloth, wipe the inside of the dustbin. Avoid washing the dustbin as it contains electronic components.
  3. Reattach the Dustbin: Slide it back into place until it clicks.

3.2 Washing the Filter

  1. Detach the Filter: Twist the filter located on top of the vacuum counterclockwise and pull it out.
  2. Rinse with Water: Hold the filter under cold running water, gently squeezing to remove trapped dust and debris. Do not use detergent or soap.
  3. Dry Completely: Let the filter air dry for at least 24 hours. Place it in a warm area, but avoid direct sunlight or heat sources.
  4. Reinstall: Once fully dry, twist the filter back into place.

3.3 Clearing the Brush Bar

  1. Turn Off and Detach: Make sure the vacuum is turned off and detach the cleaner head.
  2. Remove Hair and Debris: Use scissors to cut away tangled hair or fibers wrapped around the brush bar. Be careful not to cut the bristles.
  3. Wipe the Brush Bar: Use a soft, dry cloth to wipe off any remaining dust.

3.4 Cleaning the High-Torque Cleaner Head

  1. Detach the Cleaner Head: Press the red button to release the high-torque cleaner head.
  2. Remove the Cover: Some models allow you to remove the cover for a more thorough clean. Unscrew any visible screws if needed.
  3. Clean Internally: Wipe down the interior with a damp cloth and remove any clogs inside.
  4. Reassemble: Secure the cover and reattach the cleaner head.

3.5 Wiping Down the Exterior

  1. Use a Soft Cloth: Gently wipe down the exterior of the vacuum body with a damp microfiber cloth to remove dust and fingerprints.
  2. Dry the Exterior: Make sure all parts are completely dry before reassembling and using the vacuum again.

4. Tips for Maintaining Battery Health

  • Charge After Each Use: Fully charge the battery after each use to ensure it’s ready for the next cleaning.
  • Avoid Overcharging: Unplug the charger once the battery is fully charged to avoid stress on the battery.
  • Use Eco Mode When Possible: To extend battery life, use the Eco mode for light cleaning tasks. Boost mode should be used sparingly as it consumes more power.

5. Frequently Asked Questions (FAQs)

Q1: How often should I clean the filter?
It’s recommended to clean the filter once a month for optimal performance.

Q2: Can I wash the dustbin?
No, do not wash the dustbin with water as it contains electronic components. Use a dry cloth instead.

Q3: What should I do if there’s a blockage?
Check the wand, dustbin, and cleaner head for clogs. If found, gently remove the blockage and clean the area thoroughly.

Q4: Can I use any cleaning solution on the vacuum?
No, only use water for the filter. For the exterior, a slightly damp cloth is sufficient.

Q5: How can I store the Dyson V11 for longer life?
Store the vacuum in a cool, dry place away from direct sunlight or heat sources. Ensure the filter is dry before storage.


Regular cleaning and maintenance keep your Dyson V11 performing at its best, helping you enjoy powerful, hassle-free cleaning. Following these steps will help you protect your investment and maintain top-notch cleaning efficiency for years.

Editor’s recommendations